What each type removes
- Sediment filter: sand, rust and silt. Usually the first stage, protecting the filters after it.
- Carbon filter: chlorine and chloramine, and the taste and smell that come with them. A carbon block certified for it also reduces lead and some chemicals.
- Reverse osmosis: dissolved salts, fluoride, heavy metals and most PFAS. It sends some water to the drain as it works, and removes minerals too.
- UV: kills bacteria and other microbes. Used on tank water, after a sediment filter.
- Water softener: removes the hardness that causes scale. It is not a filter and does not improve safety.
Under-sink filters
An under-sink system is one or two cartridges in the cupboard, connected to the cold water. The filtered water comes out of a small separate tap, or a three-way mixer that replaces the kitchen tap. It treats only what you drink and cook with, so the cartridges last and the cost stays low.
A reverse osmosis system is bigger: several stages, a small storage tank and a connection to the drain. It suits people who want fluoride or PFAS reduced, or who are on bore water.
Whole-house filters
A whole-house system goes on the main pipe after the water meter, so every tap, shower and appliance gets filtered water. Most are a large sediment cartridge followed by a large carbon one. They take the disinfectant out of showers and keep sediment out of valves and appliances.
Homes on tank water usually need the whole-house kind: sediment and carbon filters followed by a UV unit, because rainwater off a roof is not disinfected. A clogged whole-house cartridge cuts the pressure at every tap, so the cartridges have to be changed on time.
Does Ipswich water need filtering?
Ipswich town water is treated by Seqwater and delivered by Urban Utilities, and it is tested against the Australian Drinking Water Guidelines. It is safe to drink from the tap. What people notice is the taste of the chloramine used to disinfect it, which a good carbon filter reduces, and moderate hardness, which leaves scale in kettles.
The water quality checker shows the figures for each suburb. Tank water is a different matter: it is only as clean as the roof, the gutters and the tank, so filtration and UV are worth having.
Installation and upkeep
Connecting a filter to the water supply is plumbing work, which in Queensland means a licensed plumber. Changing the cartridges afterwards is something a homeowner may do. The plumber may also fit a pressure limiting valve, because filter housings are rated for a maximum pressure. Run the tap for a few minutes after each cartridge change to flush out carbon dust.
Typical cost: An under-sink filter, supplied and installed, is typically $250–$600. A whole-house system is typically $800–$3,000. See the price guide.
