LICENSED LOCAL PLUMBERS ACROSS 53 IPSWICH SUBURBSRedbank Plains, Ipswich · Queensland
LEAKS · 3 MINUTE READ

Flexi hoses:
check them before one bursts.

THE SHORT ANSWER

A flexi hose is the braided stainless steel hose that connects a tap, toilet cistern or dishwasher to the water pipe. Inside the braid is a rubber tube under mains pressure all day. They last roughly 5 to 10 years, and when one bursts it can flood a house in minutes. Check each one twice a year for rust spots, fraying, kinks or bulges, and have any doubtful hose replaced before it fails.

Two braided stainless steel flexi hoses under a bathroom basin lit by a torch, one with rust-coloured spots and broken strands in the braid
Rust spots and broken strands in the braid: this hose should be replaced now.
TWICE A YEAR

Check every hose
in five steps.

  1. Find every hose

    Under the kitchen sink, each basin and the laundry tub, behind each toilet, and at the dishwasher. A typical home has 10 to 15.

  2. Use a torch and a tissue

    Check the whole length of the braid, then run a dry tissue down it. Dampness, rust-coloured spots or broken strands is a fail.

  3. Check the shape

    Kinks, tight twists, bulges or a hose stretched tight all weaken the rubber tube inside.

  4. Check the age

    Many hoses have a date on a tag or stamped on the collar. Past ten years, or unknown in an older home, plan to replace.

  5. Find the shut-offs

    Know where the small isolation valve under each fixture is, and where the main tap at the water meter is.

QUESTIONS

Quick answers.

How long do flexi hoses last?

Roughly 5 to 10 years. Heat, high water pressure and chemical fumes in the cupboard shorten that. Replace any hose with rust spots, fraying, kinks or bulges, whatever its age.

What are the signs a flexi hose is about to burst?

Rust-coloured spots on the braid, broken or frayed strands, a bulge, a kink, or any dampness along the hose. Any one of these means it should be replaced now.

Can I replace a flexi hose myself in Queensland?

No. It is plumbing work on the water supply, so it has to be done by a licensed plumber. Checking the hoses and turning off the isolation valve are things you can do yourself.

Does home insurance cover a burst flexi hose?

Many policies cover the damage from a sudden burst, but insurers can refuse a claim where the hose was visibly worn and left in place. Check your policy, and keep a record of when hoses were replaced.

How much does it cost to replace flexi hoses?

It is a short job. Replacing the hoses under a fixture usually falls within a plumber’s call-out and first hour, typically $170–$300, plus the hoses. Doing the whole house in one visit costs less per hose.

MORE GUIDES

Keep reading.

All guides
NO GUESSWORK

Rusty hose,
or one already burst?

Send what you found, how many fixtures, and your suburb. A licensed local plumber who covers the area gets back to you.

Get a local plumber
CallTextGet a local plumber