LICENSED LOCAL PLUMBERS ACROSS 53 IPSWICH SUBURBSRedbank Plains, Ipswich · Queensland
PIPES · 3 MINUTE READ

Water hammer:
why the pipes bang.

THE SHORT ANSWER

Water hammer is the bang or thud in the pipes when flowing water is stopped suddenly, by a mixer tap flicked off, a washing machine or dishwasher valve, or a toilet finishing its fill. The moving water has nowhere to go, and the shock shakes the pipe. It is fixed by slowing the shut-off, absorbing the shock with an arrestor, securing loose pipes or lowering the water pressure.

Under-sink plumbing with a waste trap and braided supply hoses inside a kitchen cabinet
Braided flexi-hoses and valves take the shock every time the pipes bang.
TRY FIRST

Four things
you can do.

  1. Find the trigger

    Note which tap or appliance sets it off, and whether it is the hot or the cold. That tells a plumber where to fit the fix.

  2. Turn the machine taps down

    Close the washing machine taps halfway. Less flow means less shock when the machine’s valve snaps shut.

  3. Fix a shuddering tap

    A tap that rattles when partly open has a worn washer or loose jumper valve. You can replace those yourself in Queensland.

  4. Fit a screw-on arrestor

    Small hammer arrestors screw between the washing machine tap and the hose, with no tools beyond your hands.

QUESTIONS

Quick answers.

What is water hammer?

A bang or thud in the pipes when flowing water is stopped suddenly. The water’s momentum becomes a pressure shock that shakes the pipe.

Is water hammer dangerous?

Not immediately, but repeated shocks loosen joints and wear valves and hoses, which leads to leaks. It is worth fixing rather than living with.

Why do my pipes bang when the washing machine fills?

The machine’s solenoid valve shuts in a fraction of a second. Turning the wall taps down halfway, or fitting an arrestor at the tap, usually stops it.

Why is water hammer worse at night?

Mains pressure rises when fewer people are using water. Higher pressure means a bigger shock. A pressure limiting valve fixes that.

How much does it cost to fix water hammer in Ipswich?

Most fixes are a short visit: $170–$300 for the call-out and first hour, plus parts such as an arrestor or a pressure limiting valve.

MORE GUIDES

Keep reading.

All guides
NO GUESSWORK

Pipes still
banging?

Send which tap or appliance sets it off and your suburb. A licensed local plumber who covers the area gets back to you.

Get a local plumber
CallTextGet a local plumber