LICENSED LOCAL PLUMBERS ACROSS 53 IPSWICH SUBURBSRedbank Plains, Ipswich · Queensland
PIPES · 3 MINUTE READ

Low water pressure?
One tap, or all of them?

THE SHORT ANSWER

Start with two questions: is it one tap or the whole house, and is it the hot, the cold or both? One tap is nearly always a blocked aerator or shower head. Hot only points to the hot water system or its valves. Low pressure everywhere points to the tap at the water meter, a failed pressure valve, old corroded pipes, a leak, or a problem in the street.

A chrome shower head crusted with white limescale, with only a thin trickle of water falling from it
Scale blocks the nozzles. Ipswich water is moderately hard, so shower heads and aerators need a soak now and then.
IN ORDER

Narrow it down
in five checks.

  1. One tap or all?

    Try the kitchen, a bathroom and the garden tap. Just one weak tap means the problem is at that tap.

  2. Clean the outlet

    Unscrew the aerator on the spout, or the shower head, and soak it in vinegar. Scale and grit block them.

  3. Hot, cold or both?

    Hot only: the fault is at the hot water system, such as a clogged inlet strainer, a failing tempering valve or a valve left half closed.

  4. Check the meter tap

    At the front boundary, make sure the tap on the meter is fully open, most of all after any plumbing work.

  5. Ask next door

    If the neighbours are low too, it is the street supply: call Urban Utilities on 13 23 64.

QUESTIONS

Quick answers.

Why is my water pressure suddenly low?

Sudden low pressure through the whole house is usually a valve left partly closed after work, a failed pressure limiting valve, a leak, or a problem in the street. Check with a neighbour first.

Why is only my hot water pressure low?

The restriction is at the hot water system: a clogged inlet strainer, a failing tempering valve or a part-closed valve on the system. That needs a plumber.

Why does only one tap have low pressure?

Its aerator or shower head is blocked with scale or grit, or its flexible hose under the sink is kinked. Unscrew the aerator and soak it in vinegar.

Who do I call about low water pressure in Ipswich?

If the neighbours have it too, Urban Utilities on 13 23 64. If it is only your house, a licensed plumber.

How much does a plumber charge to check water pressure in Ipswich?

A call-out and the first hour is typically $170–$300, plus any parts such as a new pressure limiting valve.

MORE GUIDES

Keep reading.

All guides
NO GUESSWORK

Still a
trickle?

Send which taps are weak, hot or cold, and your suburb. A licensed local plumber who covers the area gets back to you.

Get a local plumber
CallTextGet a local plumber