Continuous flow against a storage tank
- Never runs out, where a tank can be emptied by back-to-back showers.
- No heat lost from stored water sitting all day.
- Small and wall-mounted, which frees up space.
- A short wait for hot water at the tap, and a minimum flow before the burner fires, which can annoy at a trickle.
- More to buy and install than an electric tank, about the same as a gas storage heater.
Electric instant units
Electric instantaneous heaters exist, but heating water on demand takes a great deal of power. Whole-house units usually need three-phase power, which most homes do not have. Small single-point units suit a basin or a granny flat, not a family bathroom.
Set the temperature at the unit
Many continuous flow units deliver water at a set 50°C with a controller, which does the job of a tempering valve. Kitchen-grade controllers can be set hotter. A plumber sets this at installation.
Typical cost: A gas continuous flow unit is typically $1,600–$3,200 supplied and installed in Ipswich. See the price guide.
