What’s different
in Walloon.
Newer Walloon homes rarely have worn-out drains. When something keeps going wrong, a camera usually finds a cause somebody created: construction debris, a crushed or poorly bedded pipe, a misaligned junction or a foreign object. For a builder’s warranty claim, footage and a located fault keep the conversation short.
Walloon drains have been in the ground for many decades. After the second blockage, a camera costs less than another guess. It shows which fault you have: roots at an old joint, a collapsed section, a belly holding water or scale build-up. All four look identical from the surface and need four different repairs.
On Walloon acreage, long drain runs make guessing expensive. The wrong hole in the wrong paddock costs real money. A camera with surface locating pins the fault to a section and a depth before anyone digs. It can also check the line from the house to a septic tank or treatment system.
Old drains in the village core, engineered stormwater in the new estates and rural surface drainage beyond. 98% of occupied homes in Walloon are separate houses, so the drainage and stormwater on your block are almost certainly yours to maintain up to the connection point.
What the data says about Walloon
- The pipes
- Recent builds in Walloon run copper or PEX with modern fittings. The water reaches the tap much as it left the reservoir.
- Flood and silt
- Council's flood mapping does not show the major floods reaching Walloon, so silt and floodwater in the plumbing are rare here.
- The houses
- 98% of the 795 dwellings in Walloon are separate houses (2021 Census), each with its own drains to the boundary.
How the plumber finds the cause
The plumber feeds a camera along the drain from a suitable access point and shows you what it finds: blockages, roots, cracks, displaced joints, sections holding water. Where it matters, they mark the fault on the surface so its depth and position are known before anyone digs. More on cCTV drain inspections ↗
What to send us
Find any old drain reports, footage or site plans. Tell us which fixtures are affected and where the inspection openings are. If a builder, insurer or another trade needs footage or a written summary, mention it up front so the job is scoped for it.
What moves the price
Drain length, access, whether it needs clearing first, and whether you want locating and a written report all change the job. A look at one problem section costs less than a full condition survey of the property.
Typical cost in Walloon
Walloon homes pay what the rest of Ipswich pays: per inspection, usually $250–$550. Brisbane flat rates sit around $400 to $520 including GST, often with the first hour of jetting.
| Job | Typical range |
|---|---|
| CCTV inspection, line clear and accessible | $250–$350per inspection |
| CCTV inspection where the drain needs jetting first | $400–$550per inspection |
| Flat first-hour rates, Brisbane operators | $398–$523incl. GST |
| Inspection plus jetting to clear | $350–$900per job |
Full cCTV drain inspections price guide ↗
Indicative ranges, not quotes. Compiled in October 2026 from published Australian cost guides and plumber price lists, with Queensland and Brisbane figures used where they exist. The licensed plumber prices your job after seeing it, and their price can fall outside these ranges. GST is included where the published figure included it.
Sources: ABS 2021 Census QuickStats: Walloon. Distances are straight-line from Redbank Plains. Housing descriptions are general observations, not a survey of any individual property.
